Page 34 SD092750 ISSUE 34AIR INLET DUCT SPIGOT - SIDE OUTLET OPTION AW/AC4000 ONLYFILTER ACCESS PANELLOOSEN SCREWS, PUSH ACCESS PANELUP AND LIFT AWAY.(ONE EACH SIDE) 0.7m CLEARANCE FROMEDGE OF ACCESS PANEL IS NECESSARY700 700******FILTERACCESS FILTERACCESSWhen the side access air filter kit is fitted it is necessary to leave space at either one or both sides of the machineto allow for the access to the filters.Remove filter access panel(s) from machine. (There is one at each side).Insert or change the filters.Replace filter access panel(s).NOTE: If access is limited to one side it may be helpful to tape the filters together before putting them in themachine.