Callaway Micro Pro User Manual

Also see for Micro Pro: Manual

Callaway Micro Pro User Manual Manual pdf 1 page image

A. Eye PieceB. Diopter AdjustmentC. Power ButtonD. Mode ButtonE. Slope ButtonF. Charging PortLCD DISPLAYA. Zero-In Aiming SquareB. Laser IndicatorC. P.A.T. Mode IndicatorD. Pulse IndicatorE. DistanceF. Unit of MeasureG. Angle of Incline/DeclineH. Slope Adjusted DistanceRANGEFINDER DIAGRAMCALLAWAY MICRO PROLASER RANGEFINDER MANUALH4. Unit of Measure - To change the unit of measure from Yardsto Meters, start with the device powered off. Then HOLD theMode Button for 3 sec. The unit of measure is indicated by a“Y” or “M” shown directly to the right of the distance displayed.SLOPE FUNCTIONTo turn Slope on/off, press the “S” button on the top of the unit1. If GREEN is flashing: Slope function is off. The Laser istournament legal when the slope is turned off.2. If RED is flashing: Slope function is enabled. Slope adjustedyardage will be displayed after every time the laser is fired.The Laser is not tournament legal when the slope is enabled.SLOPE ON SLOPE OFFCHARGINGFOR MORE SUPPORT VISIT:www.CallawayDMD.com/product-supportCaution: Use of controls or adjustments or performance ofprocedures other than those specified herein may result inhazardous radiation exposure.1. Insert the USB-C charger end into the Micro Pro & then insertthe USB end of the charging cord into a USB charging port orAC adapter (not included). The recommended USB chargingrate is 5V, 1A.2. A complete full charge will take about 6 hours. the indicatorlight will turn green when charging is completed.3. A full charge should last 100+ rounds of golfFront indicatorlights:

/ 2

Related manuals for Callaway Micro Pro