Callaway 300 Manual

Contents

Callaway 300 Manual Manual pdf 6 page image

MEASUREMENT MODES1. Standard - Standard Mode is recommended when measuringdistances to larger objects. (Fig. A)2. P.A.T. (Pin Acquisition Technology) - P.A.T. Mode is best usedwhen measuring the distance to a flagstick or smaller objects.To toggle between Standard and P.A.T Mode, PRESS the ModeButton (M). When P.A.T. Mode is activated, the flagstick icon willappear on the left side of the LCD display. (Fig. B)3. Scanning - To measure distances to multiple targets in succession,HOLD Power Button. The Laser Indicator Box will flash and thelaser will continuously fire. Measurements will change as you scanthe landscape and change targets.NOTE: While scanning in P.A.T. Mode, the measurement will onlychange when a shorter distance is measured. This is useful whenmeasuring the distance to a flagstick when there are trees or otherobjects in the background.4. Unit of Measure - To change the unit of measure from Yardsto Meters, PRESS Power Button to power on, then HOLD ModeButton (M). The unit of measure is indicated by a “Y” or “M” showndirectly to the right of the distance displayed.6 HOW TO USE