Assembly and InstallationPage 18 2006 Barbecue Owner's ManualLTR20061004, Rev. A12. Remove one screw and loose the other screw so the stop bracket can be placed as shown. Tighten bothscrew to hold the stop bracket.The shelf has been installed onto the cart.Installing Side Burners1. Install side burner into an area of 17-1/2" long, 11" wide and 3" deep.2. Assemble a 3/8" pipe nipple to the 3/8" pipe tee using teflon tape or pipe sealant. Use only sealant that isapproved for use on LP gas.3. Install the pipe tee assembly to the grill intake pipe with pipe sealant. Tighten assembly and align thebranch opening of the tee with the hole of the cabinet.4. Connect the flexible hose (male end) to the pipe tee with pipe sealant.5. Install and secure the side burner into the island by simply setting it in place.6. Connect the female end of the flexible hose to the side burner intake pipe with pipe sealant.7. Connect gas supply to the grill.8. Check for gas leaks using soap water solution.
