Cal Flame 2008 Owner's Manual

Also see for BBQ08899P: Owner's manual Brochure Owner's manual Owner's manual Owner's manual

Cal Flame 2008 Owner's Manual Manual pdf 11 page image

2008 Barbecue Grill and Cart Owner’s Manual Page 9LTR20081038, Rev. BInstallation / AssemblyInstalling the TransformerAll grills with electrical components such as lights or a convection fanwill require the transformer to be installed and plugged in before youcan use it. This needs to be done before the grill is inserted in theisland or modular cart. When the transformer is attached to the grillchassis, use care in placing the grill in the island cutout to avoid hittingthe transformer.Remove the transformer and the metal screws from the plastic1.bag.Place the grill on a sturdy surface and tilt it back to show the2.underside of the grill.Using the metal screws, attach the transformer to3.the left side of the grill near the internal electricalconnection. Attach the metal plate to the outsidesurface of the grill as shown in the figure below.When you have firmly tightened the screws and4.nuts, connect the plug from the transformer to thegrill. Screw on the stainless steel retainer.