1-5Memory Seat and Mirrors (If Equipped)After adjusting the driver’s seat to a comfortable position,also adjust the interior and exterior mirrors. To programthe memory seat and mirrors, press memory button “M”and memory button “1” at the same time and hold forfive seconds.These buttons are located on the outboard side ofthe driver’s seat. Seat and mirror positions may beprogrammed for two additional drivers by repeatingthe above steps and pressing memory button “2”or “3” instead of memory button “1.”If your vehicle is in PARK (P), you can recall mirror andseating positions by pressing and holding one of thethree memory buttons. This will adjust the seat andmirrors to where you have previously programmedthem. Seat and mirror movement is immediately stoppedif the memory button is released or if a seat or mirrorcontrol is moved.If you try to adjust the driver’s memory seat and itdoesn’t move, try opening the driver’s door. Thiswill reactivate power to the driver’s seat. (Power tothe driver’s seat “times out” after 30 seconds.Power to the passenger’s seat is always present.)
