2-39Windshield WipersWIPER: Move the lever on the passenger’s side of thesteering wheel up and down to control the wipers.MIST: Tap the lever up and then release it for a singlewipe cycle. For more cycles, pull and hold the lever.= (HIGH): Move the lever all the way up for a fastwiper speed.- (LOW): The third position up controls the lowwiper speed.-- (DELAY): This position is for a controlled delaysetting. Turn the control dial on the lever to increase ordecrease the delay between wipe cycles.o (OFF): This position turns off the wipers.Be sure to clear ice and snow from the wiper bladesbefore using them. If they’re frozen to the windshield,carefully loosen or thaw them. If the blades dobecome damaged, replace them with new blades. See“Windshield Wiper Blade Replacement” in the Index.Heavy snow or ice can overload the wiper motor.A circuit breaker will stop the motor until it cools.Clear away snow or ice to prevent an overload.