2848Pag. 2020 - Manual code: 119EU87119EU87 ver. 0.10.1 01/2009 © CAME cancelli automatici s.p.a. - The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.ENGLISH10 Maintenance10.1 Periodic maintenancePeriodic maintenance to be carried out by the end-user is as follows: wipe clean the glass surface of the photocells; checkthat the safety devices work properly; remove any obstructions.We suggest checking the state of lubrication and tightness of the anchoring screws on the operator.- To check the efficiency of the safety devices, move an object in front of the photocells when gate is closing. If the operator invertsthe motion or stops, the photocells are working properly.This is the only maintenance procedure to be carried out with the power source connected.- Before performing any maintenance procedures, cut off the main power, to prevent possible accidents due to heavy doormovement.9 Safety instructionsThis product must only be employed for its originally intended use. Any other use is wrong and potentially dangerous. Themanufacturer cannot be held liable for any damages resulting from wrongful, erroneous or negligent uses.Avoid working close to the hinges or other moving mechanical parts. Stay out of the opening/closing arc when operator is in motion.Do not exercise force against the motion of the operator as this could result in potentially dangerous situations.Do not allow children to play or loiter within the opening/closing arc of the operator. Keep remote controls and any other commanddevice out the reach of children, to prevent operator from being activated by accident.In the event of anomalous behaviour, stop using the operator immediately.Important safety instructionsDanger of crushing handsDanger of crushing feetDanger! High voltageNo transit during operation