CAME KRONO KR300 Installation Instructions Manual

Also see for KRONO KR300: Installation manual Operation manual Installation manual

CAME KRONO KR300 Installation Instructions Manual Manual pdf 18 page image

172.10 - Powering up the Control PanelConnect protected mains power to terminals L1 + L2 in the control panel (L2 being LIVE!). Ensure thatthe control panel is adequately earthed.END OF INSTALLATION STAGE 2BEFORE STARTING STAGE 3 - InstallationCommissioning the Control panelPLEASE CHECK THAT YOU HAVE CORRECTLY:Ref Page1. Installed Motors 2.1 102. Installed Centre Stops 2.2 113. Checked Manual Release 2.3 124. Fitted the Control Panel in the Casing 2.4 135. Wired the Motors 2.5 146. Wired the Safety Photocells 2.6 147. Inserted the Frequency Card 2.7 158. Wired the Tuned Antenna 2.8 159. Coded the Remote Controls 2.9 1610. Powered up the Control Panel 2.10 17NOW STAGE 2 IS FULLY COMPLETED YOU ARE READY TO BEGINSTAGE 3 OF YOUR KRONO AUTOMATION KIT INSTALLATION.