Bosch WAV28MX0SA User Manual And Installation Instructions

Also see for 8 Series: Instruction manual Recipes Instruction manual Installation instructions Assembly instructions

operation en3113.8 Starting the programmeRequirement: A programme is set.→ "Setting a programme", Page 29▶ Press Start/Reload .a The drum rotates and load detec-tion takes place. This can take upto 2 minutes, after which waterenters the drum.a The display shows the programmeduration or the programme endtime.a After the programme has ended,the display shows: -0-.13.9 Soaking laundryNote: No additional detergent is re-quired. The washing solution is thenused for washing.1. Start the programme.2. To pause the programme, after ap-prox. 10 minutes, press Start/Re-load .3. To resume the programme, afterthe desired soaking time, pressStart/Reload .13.10 Adding laundryAfter the programme starts, you canremove or add laundry depending onthe programme status.1. Press Start/Reload .The appliance pauses.Note: If you want to add laundry,follow the instructions on the dis-play.→ "Display", Page 212. Open the door.3. Add or remove laundry.4. Close the door.5. Press Start/Reload .13.11 Cancelling the pro-gramme1. Press Start/Reload .2. Open the door.The appliance door remainslocked for safety reasons if thetemperature and water levels arehigh.– If the temperature is high, startthe Rinse programme.– If the water level is high, startthe Spin programme or select asuitable programme for draining.→ "Programmes", Page 243. Remove the laundry.→ "Unloading the laundry",Page 3113.12 Resuming the pro-gramme when the pro-gramme status is RinseHoldRequirements¡ Rinse Stop is activated.→ "Buttons", Page 22¡ The last rinse cycle of the set pro-gramme has ended and the laun-dry is in the rinsing water.1. Set the Spin programme or a pro-gramme for draining the water.→ "Programmes", Page 242. Press Start/Reload .13.13 Unloading the laundry1. Open the door.2. Remove the laundry from thedrum.13.14 Switching off the appli-ance1. Press .2. Turn off the tap.