Bosch SHI 4302 Repair Manual

Contents

H 41Base Components – Front AccessibleFig. 10-9 Fig. 10-10Fig. 10-11 Fig. 10-12 Fig. 10-131 2Cut Away View31 2ABTo remove the Drain Motor, item 1, first remove theSump Fill Hose, item 2, by pulling it out from theSump and side inlet connections (see Fig. 10-10)This cut away view shows:Item 1, Drain Motor.Item 2, Drain Motor Locking Tab.Item 3, the Sump Fill Hose and its twoconnection points A and B.Next, remove the wiringconnectors and then whilepulling back on the Locking Tab,turn the Drain Motor clockwise.Continue turning the Drain Motorclockwise until it reaches the twoO’clock stop position. Thenbring the motor out from theSump.The Drain Motor is mounted tothe Sump using a slot and tab fit.To install the Drain Motor, insert itback into the Sump at the twoO’clock position making sure thatall three slots and tabs line up,then turn counter-clockwise untilsecure and the Locking Tab locks.