Home Connect® en-us192. To open the appliance settings, press button for 3seconds.1 2 3AAa The refill indicator for rinse aid flashes.3. Press button repeatedly until the Rinse Aid andSanitize LEDs flash.4. Press button repeatedly until the LED (1) lights up.1 2 3A1If the LED is not lit up, Wi-Fi is switched off.If the LED is lit up, Wi-Fi is switched on.5. To store the settings, press button for 3 seconds.Setting the signal volume1. Press .2. To open the appliance settings, press the button for 3seconds.1 2 3AAa The refill indicator for rinse aid flashes.3. Press the button repeatedly until the Clean and RinseAid LEDs flash.4. Press the button repeatedly until the right signalvolume has been set.1 2 3A21 30, 1, 2 or 3 LEDs will light up accordingly. The selectedsignal tone will sound.The factory setting is level 2.5. To store the setting, press the button for 3 seconds.Restoring factory settings1. Press .2. To open the appliance settings, press the button for 3seconds.1 2 3AAa The refill indicator for rinse aid flashes.3. Press the button repeatedly until the Clean, Rinse Aidand Sanitize LEDs flash.4. Press the button.a The LEDs flash. The appliance is reset to factorysettings.1 2 3A21 3Home Connect®14 Home Connect®Home Connect®This appliance is network-capable. Connecting yourappliance to a mobile device lets you control its functionsvia the Home Connect® app.The Home Connect® services are not available in everycountry. The availability of the Home Connect® functiondepends on the availability of Home Connect® services inyour country. You can find information on this at:www.home-connect.com.