Bosch Professional GWS Series Original Instructions Manual

Also see for GWS 11-125 Professional: Original instructions Original instruction Original instructions Original instructions Original instructions

22 | Englishpany for assistance. Contact with electric lines can leadto fire and electric shock. Damaging a gas line can lead toexplosion. Penetrating a water line causes property dam-age or may cause an electric shock.u Do not touch grinding and cutting discs until they havecooled down. The discs can become very hot while work-ing.u Release the On/Off switch and set it to the off positionwhen the power supply is interrupted, e. g., in case ofa power failure or when the mains plug is pulled. Thisprevents uncontrolled restarting.u Secure the workpiece. A workpiece clamped withclamping devices or in a vice is held more secure than byhand.Products sold in GB only:Your product is fitted with an BS 1363/A approved electricplug with internal fuse (ASTA approved to BS 1362).If the plug is not suitable for your socket outlets, it should becut off and an appropriate plug fitted in its place by an au-thorised customer service agent. The replacement plugshould have the same fuse rating as the original plug.The severed plug must be disposed of to avoid a possibleshock hazard and should never be inserted into a mainssocket elsewhere.Product Description andSpecificationsRead all the safety and general instructions.Failure to observe the safety and general in-structions may result in electric shock, fireand/or serious injury.Please observe the illustrations at the beginning of this oper-ating manual.Intended useThe power tool is intended for cutting, roughing and brush-ing metal and stone materials, as well as making holes instone materials using diamond core cutters, without the useof water.A special protective guard for cutting must be used whencutting bonded abrasives.Sufficient dust extraction must be provided when cuttingstone.With approved abrasive tools, the power tool can be used forsanding with sanding discs.The power tool must not be used to grind concrete.Product FeaturesThe numbering of the product features refers to the diagramof the power tool on the graphics page.(1) Unlocking lever for protective guard(2) Spindle lock button(3) On/off switch(4) Speed preselection thumbwheel(GWS 13-125 CIE / GWS 15-125 CIE /GWS 15-125 Inox / GWS 17-125 CIE /GWS 17-125 CIT / GWS 17-125 Inox /GWS 19-125 CIE)(5) Auxiliary handle (insulated gripping surface)(6) Protective guard for cuttingA)(7) Protective guard for grinding(8) Extraction guard for grindingA)(9) Mounting flange with O‑ring(10) Carbide grinding headA)(11) Grinding discA)(12) Cutting discA)(13) Quick-clamping nut A)(14) Clamping nut(15) Two-pin spanner for clamping nutA)(16) Grinding spindle(17) Handle (insulated gripping surface)(18) Extraction guard for cutting with cutting guidesA)(19) Diamond cutting discA)(20) Hand guardA)(21) Cup brushA)(22) Rubber sanding padA)(23) Abrasive discA)(24) Round nutA)(25) Diamond annular cutterA)A) Accessories shown or described are not included with theproduct as standard. You can find the complete selection ofaccessories in our accessories range.Technical DataAngle grinder GWS 9-115 9-125 11-125 12-125 CI 12-125 CIArticle number 3 601 G9B 0.. 3 601 G9C 0.. 3 601 G9D 0.. 3 601 G93 06. 3 601 G93 0G.Rated power input W 900 900 1100 1150 1200Power output W 530 530 740 530 640Rated speed min-1 11,500 11,500 11,500 11,500 11,500Speed adjustment range min-1 – – – – –Max. grinding disc dia-metermm 115 125 125 125 1251 609 92A 5WS | (06.08.2020) Bosch Power Tools