Bosch PXV8 HC Series Information For Use

Also see for 6 Series: Instruction manual User manual Instruction manual Instructions for installation and use Instructions for installation and use

en PowerBoost12Switching on TimerRequirement: Assign the function to .1. Press .2. Select the required time.a The time starts to elapse.a A signal tone sounds and the displays flash oncethe time has elapsed.Changing or switching off the Timer1. Press .2. To switch off the function, change the cooking timeor set it to .PowerBoost12 PowerBoostThe PowerBoost function enables you to heat up largequantities of water faster than when using .This function is available for all cooking zones,provided the other cooking zone on the same side isnot in use. Otherwise, and flash on the display forthe selected cooking zone. is then set automaticallywithout activating the function.12.1 Switching on PowerBoost1. Select the cooking zone.2. Toucha The display lights up.a The function is activated.Note: You can also switch on this function when cook-ing with a connected FlexZone.12.2 Switching off PowerBoost1. Select the cooking zone.2. Touch .a The display goes out and the cooking zoneswitches back to power levela The function is switched off.Note: In certain circumstances, the appliance switchesthis function off to protect the electronic elements in-side the hob.PanBoost13 PanBoost1You can use this function to heat up pans more quicklythan with . Do not use the PowerBoost function withfrying pans – this may damage the coating.You can activate the function via Home Connect or Fa-vourite button.This function is available for all cooking zones,provided the other cooking zone on the same side isnot in use. Otherwise, and flash on the display forthe selected cooking zone. then switches on auto-matically.13.1 Recommended applications¡ Do not place a lid on the pan.¡ Never leave pans unattended when they are heatingup.¡ Only use cold pans.¡ Use pans with a completely flat base. Do not usepans with a thin base.13.2 Switching on PanBoostRequirement: Assign the function to .→ "Favourite button", Page 10.1. Select the cooking zone.2. Touch .a lights up.a The function is activated.Note: You can also switch on this function when cook-ing with a connected FlexZone.13.3 Switching off PanBoost1. Select the cooking zone.2. Select the power level.a goes outa The function is switched off.Note: To avoid high temperatures, this function auto-matically switches itself off after 30 seconds.Keep-warm function14 Keep-warm function1You can use this function to melt chocolate or butter,and to keep meals warm.You can activate the function via Home Connect or Fa-vourite button.1 Available depending on software version. Further information on availability can be found on the website.