Bosch LTC 2380 User Manual

Contents

Digital Video Quad Processor Unpacking | en 19Bosch Security Systems, Inc. User’s Guide F.01U.090.110 | 3.0 | 2010.042.4.2 Using the Function Keys (LTC 2382/90)Programming the LTC 2382/90 includes setting titles for the video inputs, assigning dwelltimes for each video input and quad display for sequencing (SEQ) operation, enabling ordisabling the alarms, and video loss alarm and enabling or disabling the security lock. Each ofthese functions are pre-programmed with a factory default setting.If there is no key activity while in Menu mode for one minute the unit automatically exits themenu mode.To access the MAIN menu:1. Press the MENU key to display the MAIN menu screen. The unit displays the followingscreen:The PLAY and SEQ/ALM keys are not used in programming. See Table 2.1 above fordescriptions of the function keys.Configuring the Time and DateSet the time and date format, the current time/date and the displayed position on the monitorfrom the TIME/DATE menu.1. Access the MAIN menu.2. Press the Up and Down arrow keys and select TIME/DATE; then press the Return key. Theunit displays the following menu:MAIN MENU VER X.X(1) TIME/DATE(2) SEQ SETUP(3) ALARM SETUP(4) REC OUT MODE(5) CAMERA TITLES(6) COLOR ADJUST(7) SYSTEM SETTINGS> (8) EXIT MENUi NOTICE! The Video Quad illuminates the appropriate LEDs, located on the front panel, foractive keys.TIME/DATE(1) TIME FORMAT(2) DATE FORMAT(3) TIME/DATE SET(4) DISPLAY: TOP 1> (5) RETURN