en Installation and connection104 Installation and con-nection4.1 Scope of deliveryAfter unpacking all parts, check forany transport damage and for com-pleteness of delivery.If you have any complaints, contactyour dealer or our after-sales service→ Page 24.The delivery consists of the following:¡ Free-standing appliance¡ Equipment and accessories1¡ Installation material¡ Installation instructions¡ User manual¡ Customer service directory¡ Warranty enclosure2¡ Energy label¡ Information on energy consump-tion and noises4.2 Criteria for the installationlocationWARNINGRisk of explosion!If the appliance is in a space that istoo small, a leak in the refrigerationcircuit may result in a flammable mix-ture of gas and air.▶ Only install the appliance in aspace with a volume of at least1 m3 per 8 g refrigerant. Thevolume of refrigerant is indicatedon the rating plate. → "Appliance",Fig. 1 /5 , Page 13The weight of the appliance ex worksmay be up to 75 kg depending onthe model.The subfloor must be sufficientlystable to bear the weight of the appli-ance.Permitted room temperatureThe permitted room temperature de-pends on the appliance's climateclass.The climate class can be found onthe rating plate. → "Appliance", Fig.1 /5 , Page 13ClimateclassPermitted room tem-peratureSN 10 °C to 32 °CN 16 °C to 32 °CST 16 °C to 38 °CT 16 °C to 43 °CThe appliance is fully functional withinthe permitted room temperature.If an appliance with climate class SNis operated at colder room temperat-ures, the appliance will not be dam-aged up to a room temperature of5 °C.Over-and-under and side-by-sideinstallationIf you want to install 2 refrigeratingappliances one over the other or sideby side, you must maintain a clear-ance of at least 150 mm between theappliances. Selected appliances canbe installed without a minimum clear-ance. Ask your dealer or kitchenplanner about this.1 Depending on the appliance specifications2 Not in all countries