Bosch HMC80252UC Installation Manual

Also see for 800 Series: Installation instructions Service manual Quick start and safety guide Use and care manual Installation instructions

6Dimensions and Cabinet RequirementsGeneral Cabinet RequirementsCabinet requirements vary depending on the model to beinstalled. Please consult the section “Dimensions” forthe details pertaining to your particular model.All models require:▯ ¼" (6.4 mm) space between the side of the applianceand an adjacent wall or cabinet door when installed atthe end of a cabinet run.▯ The cabinet base must be flat and capable ofsupporting the weight of your appliance when in use.See the appropriate weight for your model in theDimensions section pertaining to your particularmodel. For combination units consult the sectionCabinet Dimension Requirements in the installationmanual of your combination appliance.▯ The appliance door will overlap the furniture below byapprox. 3/16" (5 mm) when opened. If necessary, youcan elevate the appliance position by adding a panelin the required thickness on top of the supportingbase. The supporting base must be level and securelyfixed to the cabinet.Outlet AreaAnywhere within the shaded area the minimal distancebetween the appliance and the wall is 1¾ in (45 mm).Appliances with plug connection: The outlet can belocated anywhere within the shaded area.Appliances with wire conduit connection:▯ For stand alone installation, the electrical connectionbox must be mounted to the wall inside the cabinetcavity anywhere within the shaded area.▯ For installation as part of a combination of variousBosch appliances, please consult the installationmanual of the combo-unit.Dimensions for 30" Wall-Mounted UnitsHMC80152UCHMC80252UCHMC80242UCHMCP0252UCAppliance DimensionsCabinet DimensionsNOTICE: The cabinet base must be flat and capable ofsupporting a weight of at least 142 lbs (64.1 kg).PPPP+0&38&+0&8&+0&8& PPç¼ʚʌ¼ʚëèç¼ʓʘ ëç¼ʚê+0&8& êç¼ȫȰ PP