Bosch HBL8743UC Installation Manual

Also see for 800 Series: Installation instructions Service manual Quick start and safety guide Use and care manual Installation instructions

8Appliance and Cabinet Cutout DimensionsIt is good practice, when an oven is installed at the endof a cabinet run, adjacent to a perpendicular wall, orcabinet door, to allow at least 1/4” (6.4 mm) spacebetween the side of the oven and the wall/door.For oven support, install 2x4s extending front to backflush with the bottom and the sides of the opening. Thesupporting base must be well secured to the floor/cabinet and level.Junction boxes can be located anywhere within reach ofthe oven’s power cable.The cabinet base must be flat and capable of supportingthe weight of the combination oven up to 429 lbs.(195 kg).Dimensions for Single Oven UnitsThe cabinet base must be flat and capable of supportinga weight of at least 232 lbs (105 kg).Under oven dimensions are provided as a generalguideline and may be adjusted as needed based on aparticular application. Consult a design professional foroptimizing personal preferences.Single Oven Appliance DimensionsSingle Oven Wall Mount Installation*For single ovens installed into a wall cabinet, thejunction box may be located above, beneath, left or rightof the unit within reach of the power cord.**For oven installation in a wall cabinet, the control paneloverlap is a minimum 3/8" (10mm) to max. 2" (51mm).Single Oven Flush Mount InstallationFlush installation requires two side cleats to be attachedinside the cabinet frame, recessed from the front.Top ViewSide View PP PPʌ¼ʚPLQëPD[òIOXVKLQVHWGHSWKò ô UHYHDOFOHDWVô UHYHDOFOHDWV PPò ǫǩIOXVKFXWRXWKHLJKW PPUHYHDOFOHDWV