Open an archive fileAfter starting the player, check the relevant directory to locate your archive files (identified byfile extensions .mpg, .mp4, .dav, .264, .dev, .asf).These files can be opened and played in 2 ways:– Using the Open button on the player - you will be asked to browse and select the file(s)to be played on the Player– Use the mouse to drag an archived file onto the player (you can also drag a batch of filesto store them in the player memory; the last file that is dragged onto the player isautomatically started in play mode)Player controlAs the record file is playing use the player interface buttons to further control the play statusof the archived files. Another control possibility is to scroll your mouse over an active channelscreen to activate four separate buttons in the top of the screen – see following figure.These buttons have the following functions:Show file resolution and frame rateZoom in on a segment of the screen (press the button and then select the desiredregion by drawing a rectangle with your mouse on the screen; if required, press thebutton again and then scroll the zoomed image with your mouse; when finished,right-click the mouse to exit the zoomed areaWhen playing the video file, click to save current video frame as an image file to aspecified directory (assigned in Config > Snap Path)Close the file that is currently playingSee also– Authentication (checking watermark), page 124– Configuration, page 126DIVAR AN 3000 / DIVAR AN 5000 Archive Player operation | en 123Bosch Security Systems Operations Manual 2014.10 | 2.0 | AM18-Q0669