Bosch DIVAR AN 5000 Operation Manual

Also see for DIVAR AN 5000: Installation manual Installation manual User guide Manual Installation manual

Contents

Hard Disk (HDD)Figure 6.29: Hard diskHere you can view the current HDD status, and manage it with the following settings:– SATA: shows the current selected hard disk where the system will continuously record,overwriting the oldest unprotected video on the hard disk with newer video. When anHDD is working properly, it is shown as O; if an HDD error has occurred, it is shown as X– ESATA (only available on the DIVAR 5000): shows the current selected hard disk wherethe system will continuously record. If required, press the ESATA button to access a newstatus screen where you can detect ESATA connections.– Alarm set: Click this button to access the ‘System events’ menu to set how the systemwill react to an HDD error. See System events, page 72 for more on this menu.– Alarm release: Click this button to turn off the alarm settings for the HDD.– HDD no.: Select an HDD from the dropdown list to change its setting – see below.– Set to: Select an HDD mode from the dropdown list:– Read/Write– Read-only– Format all data on the HDD – here you will need to also click to confirmthe format processNotice!System reboot requiredYou must reboot the system to activate any modificationsThe bottom half of the screen shows the current HDD type, status, capacity and the recordingtime(s).6.13DIVAR AN 3000 / DIVAR AN 5000 Configuration | en 71Bosch Security Systems Operations Manual 2015.02 | 2.1 | AM18-Q0669