Bosch D8108A Quick Installation Manual

Also see for D8108A: Installation guide Installation guide Installation guide

Safety!Caution!Remove all power (AC and battery) before mak-ing any connections. Failure to do so might res-ult in personal injury and/or equipment dam-age.IntroductionAttack resistant enclosure to contain and protect compat-ible control panels in high-security mercantile alarm ap-plications. The D8108A-CE version includes a transformerfor CE installations.System overview3.55 in.16 in.16 in.143256b36a31 Tamper switches (2)2 1 in. (2.5 cm) 6-32 screws (6) and nuts (6) for thetamper switches3 7/8 in. (2.2 cm) 8-32 machine screws (5)4 D101 Lock and key5 Tamper switch mounting holes6a Enclosure base knockout (top) for ¾ in. (2 cm) con-duit6b Enclosure base knockout (bottom) for ¾ in. (2 cm)conduitInstallation1. Attach the lead wires to the terminals on the tamperswitch and wire in series with an EOL resistor.2. Push the tamper switch screws through the mountingholes in the top of the enclosure and through theholes in the tamper switch.3. Place and tighten the tamper switch nuts on thescrews to attach the tamper switch to the enclosure.4. Install the lock on the enclosure door for UL burglaryand fire applications.5. Install the control panel and mounting skirt inside theenclosure.6. Wire, program, and test the control panel and relatedperipheral equipment.7. Wire the tamper switch to a control panel protectivezone or point input.8. Close the enclosure door.9. Push the machine screws through the door and en-closure holes to attach the door to the enclosurebase.D101 lock installationD101 embedded installation videoICP-EZTS tamper switch installationICP-EZTS tamper switch embedded installation videoTransformer wiring diagram2L N34USB POWERSTATUSBASELINK TETHERNETUSBEARTH GROUNDCOMMONBATTERY ( - )+ AUX POWERBATTERY ( + )CLASS 216.5 VAC 40 VA 60 HzTRANSFORMER10987654321WARNING!Multi-Batteryinstallation requiresModel D122 or D122LDual Battery Harness.Improper installationcan be a fire hazard.Low 12.1 VDCLoad Shed 10.2 VDCOUTPUTB (2)OUTPUTA (1)OUTPUTC (3)11 Low voltage AC2 Ground wire connection3 AC IN4 Wire tie the AC IN wires to the enclosure lanceTechnical dataDimensions 16 in. x 16 in. x 3.5 in. (41cm x 41 cm x 9 cm)Color WhiteCompatible TamperSwitchesD110 (P/N: 4998137947) orICP-EZTS (P/N:F01U217038)D101 Lock and Key Included (P/N:4998800200)Transformer Included with D8108A-CEonlyD8108A certificationsRegion CertificationUS UL 294 - Access Control System UnitsUL 365 - Police Station Connected Burglar AlarmUnits and SystemsUL 609 - Local Burglar Alarm Units and SystemsUL 864 - Control Units and Accessories for FireAlarm SystemsUL 985 - Household Fire Warning System UnitsUL 1023 - Household Burglar-Alarm System UnitsUL 1076 - Proprietary Burglar Alarm Units andSystemsUL 1610 - Central Station Burglar Alarm UnitsCSFM - California Office of The State Fire Mar-shalFDNYCanada CAN/ULC S303 - Local Burglar Alarm Units andSystemsCAN/ULC S304 - Signal Receiving Centre andPremise Alarm Control UnitsULC-ORD C1023 - Household Burglar Alarm Sys-tem UnitsD8108A-CE certificationsRegion CertificationEurope CE

/ 2

Related manuals for Bosch D8108A