Bosch Conettix D6672 Installation Instructions Manual

D6672 | Installation Instructions | 3.0 Operation.Bosch Security Systems, Inc. | 1/09 | 4998122715-02 72.3 Network Connection1. Connect a D6680/D6682 (optional) to COM1(Figure 17). Use the straight modem cable providedto connect to Channel 1 on the network adapter.Figure 17: Location of COM11 2OFF ON1234Detection Systems Inc.Fairport N.Y. USAInput:85-264 AC47-63 Hz2.5 AmpsBATTERY1 - COM12 - Rear of D66002. Use a CAT5e or CAT6 Ethernet cable to connectthe other end of the second network adapter to thenetwork hub.3. Connect a PC with an Ethernet card to thenetwork using a CAT5e or CAT6 Ethernet cable.This PC is connected to the network forD6200 software applications and forconfiguring the network adapters.4. Apply power to the network adapters.5. Using a PC connected to the network, configurethe network adapters through a telnet connection.Refer to Configuration of the D6680/D6682 NetworkAdapters in the Conettix D6600 Network System Guide(P/N: 4998122712) for further details. Contact thenetwork administrator for assistance.3.0 OperationUse the optional Conettix D6672 COM1 ExpansionKit to minimize network traffic on the D6680/D6682connected to COM4 (on the D6600). The D6672 cancommunicate control panel messages andprogramming from the D6200 Programming Softwareusing a network connection. COM4 operates the sameas COM1 but can also communicate the automationoutput through the network connection.4.0 SpecificationsTable 1: SpecificationsVoltage Range 12 VDC NominalAdditional BatteryCurrent10 mACurrent RequiredAdditional StandbyUPS Current2 mADimensions (H x W x D) 4 in. x 6.8 in. x 0.75 in.(10.2 cm x 17.3 cm x 19 mm)Weight 3.9 oz (111 g)4-pin (from back of D6672 toD6600 CPU Card)Connectors9-pin RS-232 Port (from frontof D6672 to D6680/D6682)Operating Temperature +32°F to 122°F (0°C to 50°C)

/ 8

Related manuals for Bosch Conettix D6672