en Avoiding material damage10▶ Never place the appliance on or near hot surfaces.▶ After switching off, wait until the drive has come to a completestandstill.▶ Keep hands, hair, clothing and utensils away from rotating parts.▶ Never leave the appliance switched on if the power supply is in-terrupted. The appliance will automatically start up again follow-ing the interruption in the power supply.▶ Only attach and remove accessories once the drive has stoppedand the appliance has been unplugged.▶ Be careful when processing hot food.▶ Leave boiling food to cool down to at least 70 °C before pro-cessing.▶ Follow the cleaning instructions.▶ Clean surfaces which come in contact with food before eachuse.Avoiding material damage▶ Do not operate the appliance at no-load.Overview→ Fig. 11Switch2Ejector button3Aperture for inserting the tools4Whisks or turbo whisks15Kneading hooks6Universal cutter1 21 Depending on the model2 separate operating instructionsNote: If an accessory is not included in thescope of supply, it can be ordered fromcustomer service.Operating elementsEjector buttonFor removing the tools.Note: The ejector button can only be actu-ated if the switch is position .SwitchSymbol Functionswitched offlowest speedhighest speedInstantaneous switching(highest speed) press tothe left and hold in placeToolsWhisksThe whisks are suitable for the followingapplications:¡ beat egg whites or cream¡ make light dough such as e.g. spongemixture, cake mixture, pancake batterRecommendations for optimum results:¡ Use cream with a fat content of at least30% and when at 4-8 °C¡ Whip cream or beat egg whites in a widejugNoteThe whisks are not suitable:¡ for making mayonnaise¡ for processing heavy dough