Cleaning en234. Loosen and remove the screws on the left and rightof the appliance door (figure #).5. Before closing the door again, trap a tea towel whichhas been folded several times in the door (figure $).Pull out the front panel upwards and lay it on a flatsurface with the door handle facing downwards.Clean the panels with glass cleaner and a soft cloth.:Warning – Risk of injury!■ Scratched glass in the appliance door may developinto a crack. Do not use a glass scraper, sharp orabrasive cleaning aids or detergents.Risk of injury!■ The hinges on the appliance door move whenopening and closing the door, and you may betrapped. Keep your hands away from the hinges.Fitting the door on the appliance1. Insert the front panel at the bottom into the retainers(figure !).2. Close the front panel until both upper hooks areopposite the opening (figure ").3. Press the front panel at the bottom until it clicksaudibly into place (figure #)4. Open the appliance door again slightly and removethe tea towel.5. Screw both screws back in on the left and right.6. Put the cover back in place and press on it until itclicks audibly into place (figure $).7. Close the appliance door.Caution!Do not use the cooking compartment again until thepanels have been correctly fitted.Cleaning the railsThe rails can be removed for cleaning.:Warning – Risk of burning due to hot componentsin the cooking compartment!Wait until the cooking compartment has cooled down.Detaching the railsNote: Swing the front of the rail as far as possible (untilyou feel resistance), otherwise the appliance side panelmay become bent.1. Carefully press the front of the rail upwards until itbecomes detached, and release it from the holder atthe side (fig. !).2. Detach the rail from the holder and remove it (fig.").3. Clean the rails with washing-up liquid and a sponge/brushorClean the rails in the dishwasher.Attaching the rails1. Position the rail so that the indentations are facingupwards.2. Hook the rail in at the back and push it towards therear until it engages (fig. #).3. Hook the front of the rail onto the holder and pressdown until it engages and is fixed level in place inthe appliance once more (fig. $).Each set of rails only fits on one side.2121