Bosch AMAX panel 2000 User Manual

Also see for AMAX panel 2000 EN ICP-AMAX-P-EN: User guide Installation manual

Contents

10 en | Faults or Tamper conditions AMAX panel 2000 / AMAX panel 2000 ENF.01U.249.500 | V2 | 2011.11 User Guide Robert Bosch Engineering and Business Solutions Limited3 Faults or Tamper conditionsWhenever a system fault or tamper condition occurs, the FAULT or MAINS indicator flashesand the keypad beeps.3.1 System fault or tamper analysis ModeTo enter fault or tamper analysis mode for determining a system fault or tamper condition:1. Enter your Code and [2] and press [#]. Two beeps sound.The FAULT indicator remains litand the STAY and AWAY indicators flash. The lit zone indicators indicate the type of faultor tamper condition that occurred.2. For a multi-level menu, enter the corresponding number to enter the submenu, press [ 0] key to return to the main menu.3. To exit from Fault and Tamper Analysis Mode, press [#] . The STAY and AWAY indicatorsare extinguished and the FAULT indicator remains lit, and the keypad stops the beep.NOTICE!Operation can be carried out only in status.