Bosch AMAX 2100 User Manual

Also see for AMAX 4000: Installation guide Installation guide User guide Quick start manual Quick start manual

Arming with a Master KeypadAn optional master text keypad can be added if there is more than one assigned area on yoursystem.Please contact your installer to enable/disable this function.The master keypad can be used to arm single or all assigned areas.How to Arm All Areas in AWAY Mode:4 Enter your code + [0] [0] and press [#].P The system beeps twice, the AWAY indicator flashes slowly and exit time starts. After theexit time, the AWAY indicator is lit and all areas are displayed as armed.How to Arm All Areas in STAY Mode:4 Enter your code + [0] [0] and press [*].P The system beeps twice, the STAY indicator flashes slowly and exit time starts. After theexit time, the STAY indicator is lit and all areas are displayed as armed.How to Arm a Single Area in AWAY Mode (Direct Arm):1. Enter your code and the two-digit number of the area you want to arm.2. Press [#].P The AWAY indicator flashes slowly and exit time starts. After the exit time, the AWAYindicator is lit and the selected area is displayed as armed.4 Repeat step 1 if you want to arm multiple areas.How to Arm a Single Area in STAY Mode (Direct Arm):1. Enter your code and the two-digit number of the area you want to arm.2. Press [*].P The STAY indicator flashes slowly and exit time starts. After the exit time, the STAYindicator is lit and the selected area is displayed as armed.4 Repeat step 1 if you want to arm multiple areas.3.1.416 en | Arming and Disarming the System AMAX2014.09 | 03 | F.01U.295.569 User Guide Bosch Sicherheitsysteme GmbH