Bosch ADS-AMC2-4R4CF Installation Manual

Also see for ADS-AMC2-4R4CF: Manual Installation manual Installation manual

6 en | Safety Access Modular Controller 22022-03 | V03 | Installation manual Bosch Security Systems B.V.iNotice!Some features and functions described in this document depend on the firmware loaded intothe device and host software. Make sure that the controller is updated to the firmwareversion provided with the host system.This product is RoHS compliant. See Technical data for the full table of hazardouscomponents.1.1 UnpackingCheck the packaging for visible damage. If anything has been damaged during transport,please inform the transport agency.Unpack the product carefully. This is an electronic device that must be handled with care toavoid damage. Do not attempt to put the product into operation if components are damaged.If any parts are missing, inform your customer service representative or a Bosch SecuritySystems salesperson. The shipping carton is the safest transport container for the unit. Storethe shipping carton and the other packaging material for future use. If the product has to besent back, use the original packaging.1.2 FCC complianceThis device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:1. This device may not cause harmful interference, and2. this device must accept any interference received, including interference that may causeundesired operation.This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC rules. The limits are designed to provide reasonableprotection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures:1. Reorient or relocate receiving antenna.2. Increase the separation between the equipment and the receiver.3. Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.4. Consult the dealer or an experienced radio/TV technician for help.