Black & Decker wjd225 Manual

Contents

5ENGLISHENGLISHIntended useYour Black & Decker water filter has been designed todeliver pure filtered water quickly, removing high levels ofchlorine and limescale. This product is intended forhousehold use only.Using your filter jugX Only filter cold water.X Do not use the filter jug for any other purpose thanfiltering water.X Treated water should be consumed or discarded withintwo days.X If the water filter has not been used for more than48 hours, flush the filter twice with fresh cold water anddiscard the water before using as normal.X If the water filter is not be used for an extended period,remove the filter cartridge, place it in a clean plastic bagand store it in a refrigerator. Before using the filter afterstorage, follow the preparation instructions in thismanual.X Always store filter cartridges out of direct sunlight andaway from heat sources.Additional safety instructions for non-rechargeablebatteriesX Never attempt to open for any reason.X Do not store in locations where the temperaturemay exceed 40 °C.X When disposing of batteries, follow the instructionsgiven in the section "Protecting the Environment".X Do not incinerate the batteries.X Never try to recharge non-rechargeable batteries.X Install batteries correctly.X Make sure the contact faces are clean.X Do not mix different types or brands of batteries.X Keep batteries away from small children.X Under extreme conditions, battery leakage may occur. Ifliquid is noticed on the batteries, carefully wipe the liquidoff using a cloth. Avoid skin contact.Features1. Spout2. Lid3. Cartridge life indicator4. Water tank5. Aqua Optima TM filter cartridge6. Filter jug7. SealUnpackingX Remove all packaging from the filter jug.X Remove the lid by gripping the sides of the lid (2) andlifting it from the filter jug.X Take the water tank (4) and the filter cartridge (5) out ofthe filter jug (6) and remove any packaging.X Clean the filter jug (6) with cold fresh water.AssemblyPreparing the water filter cartridge (fig. A and B)X Prepare the filter cartridge (5) by carefully following allthe instructions on the packaging.X Remove the cartridge (5) from the packaging (fig. A).Note: There may be a small residue of black carbon particlesin the packaging or adhering to the body of the cartridge.This is normal, these particles are harmless and will bewashed off during the following preparation process.X Immerse the cartridge (5) in cold fresh water and shakethe cartridge (5) to remove the air trapped within thecartridge (5) (fig B).Note: Some loose carbon particles may be released duringthis process. This is normal and does not affect theperformance of the filter cartridge.Fitting the Aqua Optima TM filter cartridge (fig. C and D)X Remove the lid (2).X Remove the water tank (4) from the filter jug (6).X Make sure that the seal (7) is seated correctly in thebase of the water tank (4) (fig. C).Note: If the seal is missing or incorrectly fitted, unfilteredwater may leak into the filter jug.X Put the filter cartridge (5) into the recess in the base ofthe water tank (4).X Press the filter cartridge (5) against the seal (7) and turnit clockwise to lock it in place (fig. D).X Make sure that the filter cartridge (5) is securely lockedin place.X Put the water tank (4) into the filter jug (6).X Fit the lid (2).X Fill the water tank (4) with cold water, the water will passthrough the cartridge (5) into the filter jug (6).X Discard the water.X Repeat the process of filling and discarding once more.X Fill the water tank (4), the filter jug (6) is now ready foruse.Filter cartridge life indicator (fig. E)The cartridge life indicator (3) will remind you when tochange the filter cartridge (5).Note: It is recommended that the filter cartridge is changedevery four weeks.To set the cartridge life indicator (3):