LACK+C TM40V MAX _ LiTHiUM HARDSURFACE SWEEPER VACiNSTRUCTiON HANUALCATALOG NUMBERLSWV36For use only with LB series 36v or 40v Max* batteries.Thank you for choosing BLACK+DECKER!PLEASE READ BEFORE RETURNING THiS PRODUCT FOR ANY REASON.If you have a question or experience a problem with your BLACK+DECKER purchase, go to http://www.blackanddecker.com/instantanswers. If you can't find the answer or do not have access to the Internet, call 1-800-544-6986 from 8 a.m. to 5 p.m. ESTP1on.-Fri. to speak with an agent. Please have the catalog number available when you call.SAVE THiS MANUAL FOR FUTURE REFERENCE.VEA EL ESPANOL EN LA CONTRAPORTADA.INSTRUCTIVO DE OPERACION, CENTROS DE SERVlCIOY POLIZA DE GARANT{A. ADVERTENCIA: LEEASEESTE INSTRUCTWOANTES DE USAREL PRODUCTO,_Maximum initial battery pack voltage (measured without a workload) is 40 volts. Measured under a workload, nominal voltage is 36.