Black & Decker LLp120 User Manual

Also see for LLP120: Instruction manual Instruction manual

1INSTRUCTION aMaNUaL20v Max* LIThIUM aLLIgaTOR LOppeRThank you for choosing BLaCk+DeCkeR!pLeaSe ReaD BefORe ReTURNINg ThIS pRODUCT fOR aNy ReaSON.If you have a question or experience a problem with your BLaCk+DeCkeR purchase, go to http://www.blackanddecker.com/instantanswers If you can’t find the answer or do not have access to the Internet, call 1-800-544-6986 from 8 a.m. to 5 p.m. eSTMon. - fri. to speak with an agent. please have the catalog number available when you call.Save ThIS MaNUaL fOR fUTURe RefeReNCe.vea eL eSpaNOL eN La CONTRapORTaDa.INSTRUCTIvO De OpeRaCIÓN, CeNTROS De SeRvICIO y pÓLIZa De gaRaNTÍa. aDveRTeNCIa: LÉaSe eSTe INSTRUCTIvO aNTeS De USaR eLpRODUCTO.*Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured under a workload, nominal voltage is 18.CaTaLOg NUMBeRLLp120To register your new product, visit www.BlackandDecker.com/NewOwnerKEY INFORMATION YOU SHOULD KNOW:• DO NOT OVER-TENSION CHAIN. Refer to “Chain Tension ADJUSTMENT”for proper method of tensioning chain.• Retighten chain frequently during first two hours of use as chain breaks in.