Menu
Black & Decker BXMM1000E Instructions For Use Manual
                                                                                                |
8• Position the tray at the top of the mincing head.NOZZLE FOR FILLING SAUSAGES (L)• Press the lock button (C), hold the head and insert it intothe inlet. When inserting, please pay attention that thehead must be slanted as per the arrow indicated on thetop. (Fig. 1). Then move the head anticlockwise so thatthe head is fastened tightly. (Fig. 2).• Insert the screw through the outlet mouth of the mincinghead. (Fig. 3).• Place the cutting blade in the screw with the cutting edgepointing to the front. (Fig. 4).• Insert the cutting plate with the largest holes in the screw,fitting the outlets of the cutting plate in the notches of theoutlet mouth edge of the mincing head. (Fig. 5).• Insert the nozzle for filling sausages via the fixing ring.(Fig. 7).• Screw the fixing ring tightly in the outlet mouth of themincing head, turning clockwise to fit the screw, bladeand nozzle. (Fig. 6).• Position the tray at the top of the mincing head.ACCESSORY FOR KEBBE (M)• Press the lock button (C), hold the head and insert it intothe inlet. When inserting, please pay attention that thehead must be slanted as per the arrow indicated on thetop. (Fig. 1). Then move the head anticlockwise so thatthe head is fastened tightly. (Fig. 2).• Insert the screw through the outlet mouth of the mincinghead. (Fig. 3).• Insert the accessory for base Kebbe in the screw and po-sition the other Kebbe accessory on top, fitting the outletsin the edge notches of the filling mouth. (Fig. 8).• Screw the fixing ring tightly, turning clockwise to fit theaccessories for Kebbe in the screw. (Fig. 6).• Position the tray at the top of the mincing head.TOMATO JUICER ACCESSORY (N)• This accessory permits you to separate the seeds andpulp of the tomato, to extract the juice.• Insert the mincing head into the motor body, and secure itwith the fixing ring.• Insert the worm screw through the mouth of the mincinghead. (Fig. 3).• Insert the tomato accessory, fitting the protrusions withthe slots on the edge of the filler neck. Tighten the lockingring firmly by screwing it clockwise until the accessory fitsinto the worm screw. (Fig. 9).• Fit the pressure control valve, the anti-spatter guard andthe tray for collecting the juice.REVERSE FUNCTION• In case of jamming, switch off the appliance by pressingthe switch to the “R” position.• The screw will rotate in the opposite direction, and thehead will get empty.• If it does not work, switch off the appliance and clean it.• Wait for one minute before and after the reverse function.IF THE MOTOR BLOCKS• If the motor moves slowly or stops, it could be due to thefood in the blender blocking the chopper. In that case, usethe direction changer switch. To do this, place the ON/OFF switch in position 0, and press the direction changerswitch. Using the worm screw to perform this operation,the food will become loose. Pay attention in this inverseturn situation, as part of the food could come out of thefilling tube/tray. Deactivate the opposite direction turn byfollowing the previous procedure in reverse.• If the motor continues to be blocked, unplug the appliancefrom the mains and demount its accessories.CLEANING• Disconnect the appliance from the mains and allow it tocool before undertaking any cleaning task.• Clean the equipment with a damp cloth with a few dropsof washing-up liquid and then dry it.• Do not use solvents or products with an acid or base pH,such as bleach, or abrasive products, for cleaning theappliance.• Never submerge the appliance in water or any other liquidor place it under running water.• During the cleaning process, take special care with theblades, as they are very sharp.• It is advisable to clean the appliance regularly and removeany food that remains.• Neither parts of this appliance are suitable for cleaning inthe dishwasher.• Then dry all parts before their assembly and storage.SERVICE• Any misuse or failure to follow the instructions for userenders the guarantee and the manufacturer’s liability nulland void.ANOMALIES AND REPAIR• Take the appliance to an authorised technical supportservice if problems arise. Do not try to dismantle or repairwithout assistance, as this may be dangerous. |
Related manuals for Black & Decker BXMM1000E
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved