Menu
Black & Decker BIMH226W Instruction Manual
                                            |
Ice Full Indicator LightThe ice maker stops when the ice basket is full. The “ICE FULL” indicator will beon. Use the scoop to remove the ice.Water Shortage Indicator LightIf there is not enough water, the ice maker will stop automatically, and the WATERSHORTAGE indicator light will go on. Press “ON/OFF” button, fill water up tothe max. water level mark and press “ON/OFF” button again to turn on the unitagain.NOTE: Wait at least 3 minutes before restarting the unit.Page 10SET UP & USESelf-cleaning function:The unit is equipped with a self cleaning function. It is recommended to use equalparts white vinegar and water with this function. Press and hold the “ON/OFF” buttonfor 5 seconds to activate self-cleaning. The function will take 30 minutes. Whenthe program is complete, rinse with clear water and drain, making sure the vinegarsolution is removed before making ice. Dry thoroughly.CLEANING AND MAINTENANCEWARNING: Before using your ice maker, it is recommended to clean it thoroughly.Always make sure the ice maker is unplugged prior to cleaning.1. Remove the ice basket.2. Clean the interior with a mild soap and water solution and a soft sponge or cloth.3. Rinse all interior parts.4. Rinse and drain any remaining water by unplugging the drain cap located on thefront of the base.5. The outside of the ice maker should be cleaned regularly with a mild detergentsolution and warm water.6. Dry the interior and exterior with a clean soft cloth.7. When the machine is not to be used for a long time, drain water completely &dry the interior.CLEANING & CARE |
Related manuals for Black & Decker BIMH226W
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved