4. To lock the side supports, push out fromthe inside until the support locks intoposition (figure C.) CAUTION: Risk ofUnsafe Operation. Make sure all four legsand both side supports are locked in place.5. After locking the side supports in place,lift the center support section by thecarrying handle until you hear it “click” intoplace as shown in figure D.6. When the center support section isproperly locked in position, the LOCK buttonshown in figure E will be visible.CAUTION: Risk of Unsafe Operation.Make sure the center support section islocked in place.CLOSING THE WORKBENCH1. Fold the center support section down andpush in on the side supports to unlock them.(figure F)CDEF390539119 BDWM1000 6/5/08 10:17 AM Page 3

Black & Decker BDWM1000 Instruction Manual

Product

Learn More

Legal