Menu
Black & Decker BDCAL100 Instruction Manual
                      |
21 22Press [Recall][Brick] to toggle between paver brick andface brick.[Recall][Brick]To store a custom value into the user-programmablevariables shown above, one should input the value in thedefined unit as listed above, then press [Store] which isfollowed by the corresponding variable key button.For example, set the Paint Coverage per Gallon to 400.400 [Feet] [Feet][Store][Paint]Press [Clear All] to clear all stored values and setestimator back to defaults.NOTE: Changing default value will impact materialestimation result.F21.00 brSQ INCHSTO400SQ FEET400SQ FEETSTO400.00SQ FEET / GLSTOCONTINUED V-i. Fraction ResolutionBy default, the estimator is set to display fractional valuesto the nearest 16 th of an inch. The 1/16 resolution can bedisplayed by pressing [Recall][x/y].Repeated presses of [x/y] will then scroll through theavailable settings: 1/16, 1/32, 1/64, 1/2, 1/4 and 1/8. Thelast setting appears on the screen will be stored as thecurrent fractional resolution.When there is fraction displayed after calculation, you canpress [x/y] to toggle between the highest fractionalresolution and the set resolution. For example,7[Inch][÷]32[=][x/y][x/y]0 14INCH0 732INCH0 14INCH0 116INCHSTO |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved