Page 10SET UP & USEINSTALLING THE EXHAUST CONNECTORInstall the exhaust connector as shown in the illustration by lining it up with theconnector on the back of the dryer and turning it clockwise so the tabs on theexhaust connector fit into the slots on the connector:• For a downward exhaust, join the sections (1) pointing downward.• For an upward exhaust, join the sections (2) pointing upward.NOTE: The dryer must be vented. A ventilation kit with a 4” diameter duct can bepurchased at your local hardware store.

Black & Decker BCED26 Instruction Manual

Product

Learn More

Legal