User Manual Pegasus 70xx seriesTechnical data subject to change without notice.Issue 01/2010 Page 23 of 445 OperationYou are now ready to use your Pegasus 70xx for the first time.Switch on the Pegasus by pressing the Power ON/OFF key. A start screen appears.When you switch on your phone for the first time, you must configure it with varioussettings that will remain by default until you choose to modify them.After entering your PIN code, make your choice for the following settings: ring tone,sound volume, hands-free, vibration, clock/date, man down function, tracking, etc.If there are contacts saved in your SIM card, you can copy them into the phonebookmemory.5.1.1 PIN numberThis is a secret code for the SIM card. If access to the SIM card is protected, the deviceprompts you to enter the PIN number. Enter the 4-digit PIN or customized code andconfirm it with OK.For security reasons these digits will not appear on the screen.If the SIM code is not accepted or the card is not recognised, turn the Pegasus Off andcheck that the SIM card is inserted correctly in your Pegasus.If an incorrect PIN number is entered three times in succession, your SIM card will beblocked. In this case you must do the following:■ Enter the PUK code provided by your operator.■ Enter your PIN number and validate the entry.■ Enter your PIN number again and validate the entry.After 5 or 10 failed attempts, depending of the type of your SIM card, the SIM card willbe irrevocably locked. In this case you must contact your operator or provider to obtain anew card.5.2.1 Navigation PrincipleOnly 3 keys are needed to navigate through the different menus.In the menus, a title bar reminds you of the previous level.Left soft key Right soft key(to call or OK) (to hang up or Back)2-way navigation key5.1 Getting started