Baroness LM18G Owner's Manual

Also see for LM18G Series: Service manual Installation manual

Contents

Baroness LM18G Owner's Manual Manual pdf 16 page image

14Hi/Low selector lever5-4Position of air adjusting plate5-5High clipLow clipStoplow-speedhigh-speedreel coverair adjusting platereel cutterThe lever is on the lower front portion of the left cover of the left frame.There are three changeover positions - “High clip freguency”, “Rotation stop”, “Low clipfreguency”. Change the positions according to the type of work.The air adjusting plate is on the reel cover when the clutch cover is removed.The air adjusting plate is to adjust the condition of grass scattering. Move the air adjustingplate towards the reel cutter when cutting in high-speed rotation and move the air adjustingplate away from the reel cutter when cutting in low-speed rotation.reelreel stop, this allows foreasy maneuverability while engine is turned off.stopGrip the clutch, to engine the travelling driveand the machine will begin to move forward.Option Handle