VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP 51Ex: Programming a Channel Repeater Offset withCTCSS ToneEXAMPLE New memory in Channel 99:RX = 145.000 MHzTX = 145.600 MHz (This is a (+ .600) Offset)TX CTCSS tone 123.01. Change from Menu to Menu by pressing the [EXIT/AB] button.2. Set radio to VFO Mode by pressing [V/M]Channel number at the right will disappear.3. Menu 28 [M] 9 9 [M] [EXIT] Deletes Prior Data in channel (Ex. 99)4. Menu 13 [M] 123.0 [M] [EXIT] Selects desired TX encode tone5. Enter RX frequency (Ex. 145000)6. Menu 25 [M] 9 9 [M] Enter the desired channel (Ex 99)Ø [EXIT] RX has been added7. Enter TX frequency (Ex. 145600)8. Menu 25 [M] 9 9 Enter the same channel (Ex 99)Ø [EXIT] TX has been added9. [V/M] Return to MR Mode. Channel number will re-appear.
