VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP 7Belt clipAt the back of the radio there are two parallel screws mounted above thebattery, remove these and thread them through the holes on the beltclip as you screw them back into the radio body.Do not use any form of glue to fix the screws on the battery clip.The solvents in the glue may cause damage to the batterycasing.BatteryBefore attaching or removing the battery make sure your radio is turnedoff by turning the power/volume knob all the way counter-clockwise.InstallationMake sure the battery is aligned in parallel with the radio body with thelower edge of the battery about 1-2cm below the edge of the radio.Once aligned with the guide-rails, slide the battery upward until you heara click as the battery locks in place.
