Menu
Banpa BH790 User Manual
 |
Condition of the headset LED indicationPower off Blue LED light offTurning on Blue LED light flash 4 timesTurning off Red LED light flash 4 timesStandby mode( connected)Blue LED light flash twiceever y 5 secondsStandby mode Blue LED light flash twiceever y 5 secondsCall activated Blue LED light flash twiceever y 5 secondsPairing mode Blue LED light flash twiceever y 5 seconds4. Turning ON/OFF1) Turn ON: Press and hold “MFB” button 3 seconds to turnon the headset, after the beep, the blue LED will flash 4 times.2) Turn OFF: On standby mode, press and hold “MFB”button 3 seconds to turn off, after the beep, the red LED willflash 4 times.5. PairingYou are required to pair the headset with your mobile phonebefore using it.1)Place the headset within 1 meter with the mobile phone2)Make sure the headset is off3)Press and hold “MFB” button 5 seconds, the red and blueLED lights flash alternately. It enters the pairing match state.4)Turn on the Bluetooth on the mobile phone ( please referto the user manual of the mobile phone)5)Select BH790 device from the mobile phone6)Input the pairing code “0000” and confirm. After pairingsuccessfully, the red and blue LED lights flash alternately,after the beep, it enters the standby mode and the blue LEDlight flash every 6 seconds.Note: If the pairing not successfully after 2 minutes, turn offthe headset and try the matching steps again.6. ConnectionAfter pairing, the headset is on standby mode. If no headsetindicates on the mobile phone, please take the followingsteps to activate the Bluetooth.1)on mobile phone: select the device “BT790” forconnection2)on headset: press the “MTB” button, and select “ accept“ from the mobile phone.7. DisconnectionIf you want to disconnect the headset from your mobilephone, take the following steps:1)Turn off the headset directly2)Disconnect from the mobile phoneNote: After 10 minutes of disconnection, the blue LED light ofthe headset will flash 5 seconds a time.9. reset the headset to default settingsOn the standby mode, press and hold “V+” and “V-”buttons at the same time for 10 seconds, and then pressand hold “MFB” button for 3 second to turn off theheadset.Note: After the reset, the headset will enter the pairing modewhen it turned on.13.Product specification- Bluetooth compatible specifications: V4.1- Operating frequency band: 2.4GHz-2.48GHz unlicensed ISMband- Output Power: Class 2 power Output, up to 10 meters- Support Profiles: HSP, HFP1.5, A2DP Profiles- Support Multiple Paired Devices: Up to 8 devices- Integrated with the SDP echo cancellation- Battery status display on the phone (only support IOSdevice)- Battery: 61mAh (Rechargeable Lithium Polymer), 3.7V DC- Talk time: around 8 hours- Music play time: around 7 hours- Standby time: up to 130 hours- Charge time: less 2 hours- Power Input Voltage: 5V- Operating temperature range: -20C°~ + 70C°- Weight: 18g- Size: 62*39*13mm10. Low battery indicationWhen the voltage of the headset below 3.3V, the alert beepwill occur every 30 seconds. Meantime, the headset indicatoron the mobile phone turns red( need to mobile phone).When the voltage below 3.0V, the headset turn offautomatically.11. Battery ChargingTo protect the battery, please charge the headset when thebattery low. When charging, the red LED light is on. Whencharging completes, the blue LED light is on.1.About Bluetooth TechnologyBluetooth wireless technology is set to revolutionize the personalconnectivity by providing freedom from wired connections-enabling links and connectivity between notebook/laptop,mobilephones,portable handheld devices and other Bluetooth enableddevices within 10 meters,Utilizing global sound & digitaldata2.4GHz ISM transmission,it makes global communication inthe way you've never dreamed of! 8. Using the headset1)Answer callsWhen you receive calls, short press the “MFB” button onthe headset to answer calls.2)End callsDuring the call, short press the “MFB” button to hang up.3)Reject callsWhen you receive calls, press and hold the “MFB” buttonfor 2 seconds.4)Voice dialingOn Standby mode, press the “MFB” button until you hearthe beep, speak out the voice tag.Note: mobile phone is required to support voice dial (formore information, please refer to the manual of the mobilephone)5)Redial the last callPress the “MFB” button twice to redial the last number.6)Adjust the volume:During the call, press “V+” or “V-” to turn up or turndown the volumeNotice: If the volume turned to the highest or lowest, theheadset will beep.7)Transfer callsA: Headset to mobile phone:During a call, press the “MFB” button twice.B: Mobile phone to headset:Press the “V+” and “V-” buttons at the same time.Note: in three calls mode, transfer calls function will be off.8)Mute microphoneA: mute: during a call, press and hold “V-” button for 2secondsB: remove mute: press and hold “V+” button for 2 seconds9)answer or reject another call-Answer the second call hold active call:during a call,whenanother call coming ,double pree the “MFB” to pick up thecall and the active call will be hold.-Answer the second call end active call:during a call,whenanother call coming,short press the “MFB”to pick up thecall and end the active call.-Reject the secomd call:during a call,when another callcoming,press and hold “MFB”for 2 seconds to reject thecall.-During the three way call,double press “MFB”button twiceto swap the call.-During the three way call,short press “MFB”button to endthe current call and another call will be active automatic.Banpa Bluetooth HeadsetBH790 User Manual2.Appearance and function3.Function of buttonsMFBVolume up & volume downPairing password1)MFB ( Multi-Function Button); 2)Microphone;3)Volume up(V+); 4)Volume down(V-);5)Charging Port;(a)Turn on/off; (b)Pairing(c)Answer call; (d)Hang up(e)Reject a call; (f)Voice dial(g)Redial the last call(a)adjust the volume(b)Call transfer(c)Mute switch12.LED indicationPlay Music Blue LED light flash twiceever y 5 secondsMute Blue LED light flash twiceever y 5 secondsCharging Red LED light onCharging Complete Blue LED light on（disconnected） |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved