Bang & Olufsen BeoCenter 2 Audio Service Manual

Also see for BeoCenter 2: User guide Guide Repair guide Guide User manual

Contents

Bang & Olufsen BeoCenter 2 Audio Service Manual Manual pdf 23 page image

Replacement of modules 5.Replacement of modulesModules that can be replacedMaster unitReplace Keyboard left ................................................ 5.4Replace Keyboard right .............................................. 5.5Replace Display .......................................................... 5.6Replace Clamper ........................................................ 5.7Replace Clamper cover .............................................. 5.8Replace Gearbox ........................................................ 5.9Replace CD PCB ....................................................... 5.0Replace CD unit ....................................................... 5.2Replace PCB2, Top Interface ..................................... 5.4Replace Clamper drive belt ...................................... 5.5Replace Clamper motor ........................................... 5.6Replace Gearbox drive belt ...................................... 5.7Replace Gearbox motor ........................................... 5.8Servicetest position .................................................. 5.9Socket unitReplace PCB50, Analog sound engine ...................... 5.2Replace PCB85, Tuner module ................................. 5.22Replace PCB60, Switch mode power supply ............. 5.23Replace PCB6, Microprocessor ................................. 5.24Replace PCB0, Socket panel ................................... 5.25Replace PCB37, DAB module .......................................5.26Adjusting the KeyboardsAfter replacing parts in the Master unit, it may be nessasary to adjust the Keyboards.There are two adjustments:. Distance between Keyboards and Display.2. Distance between Keyboards and bottom.To adjust the distance between the display and the Keyboards (a), use the screw (Located on the back).Use the special tool delivered with the gearbox.To adjust the distance between the lids and the bottom (b), use the adjustmentsscrews 2 and 3. (Located on the back).Use a 3mm allen key for the adjustment.➀ ➀➁ ➁➂➂a aab b b bABO-CENTER v/HENRIKSENS ELEKTRONIK