Menu
Baloran Triko User Manual
                      | |
15CHOR.n WAVEWav=Sin Rat=40Control of the waveform and of the speed of Chorus modulation « n ».Wav sets the waveform of the signal which modulates the delay of the Chorus « n » Non = (None) No modulation Sin = (Sinus) Sinusoid Tri = (Triangle) Triangle Squ = (Square) Square S&H = (Sample & Hold) Random samples Rnd = (Random) Random modulation Tap = (Tape) Simulation of speed variation of a Tape Echo. For greater realism, this last modulation hasbeen recorded from a Tape Echo. CH2 = Synchronisation of Chorus "n" with Chorus 2. This option is available only for Chorus 2 and 3.Rat (0..360) sets the modulation speed. If Wav=CH2, ie this Chorus is synchronised with Chorus 2, thisparameter sets the incremental phase difference of the modulation of this chorus compared with Chorus2.CHOR.n EFFECTDly=120 Amp=53Control of delay of the line and of the amplitude of its modulation.Dly (0..200) sets the delay of the Chorus to "n" and Amp (0..100) sets the amplitude of the modulation.If Wav=CH2, ie this Chorus is synchronised with Chorus 2, these two parameters are inactive becausethey are substitued by those of Chorus 2. The delay setting is approximatively between 2ms (0) and25ms (200). The amplitude of modulation is corrected so that the delay setting associated with themodulation setting remains at best in the control band.CHOR.2 FLANGFla=OffFeedback activation (Flanger Effect).This option is accessible only for Chorus 2. If Fla is On, the output signal is partially re-injected in itsinput. This way you obtain the specific sound of the Flanger effect. The modulation amplitude and speedshould be chosen carefully in order to obtain the most musical effect. Adding Chorus 1 and 3 as supportin this mode will make the result more interesting.Ca rdEXCARD OUTPUTVol=+10 Pan= < >Control of volume / balance of optional card effects.(see Use / Control of volume and balance)Vol sets the damping of the processed signal of the optional card and Pan sets the balance of this signal.The direct signal (Dry) volume of optional card FV-1 can't be changed. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved