Baldor GLC10 Installation & Operating Manual

Contents

Baldor GLC10 Installation & Operating Manual Manual pdf 79 page image

Appendix AOptions & AccessoriesOptions & Accessories A‐1MN2408Battery ChargerBTCGR6 Battery Charger - 12 Volt / 6 Amp Float. Includes 6 ft power cord with grounding plugfor AC input power and 4 ft power cord with ring terminals for DC output. UL Listed.BTCGR10A Battery Charger - 12 Volt /10 Amp Float. Includes terminal strip for AC input powerand DC output.UL Listed.Figure A‐1 Recommended Mounting LocationsGLC60-105 Battery ChargerMounting LocationsGLC30-45 Battery ChargerMounting LocationsBTCGR6BTCGR10A BatteryTrayBTCGR10ABTCGR6BatteryTrayInstallation Considerations:Shore power must be available (120VAC or 240VAC) to power the battery charger and othercomponents that may be installed). Shore power outlets or wiring must be located close toBattery Charger.BTCGR6 Charger (refer to charger manual for specific details)1. Mount charger, refer to Figure A‐1 to determine suggested location.2. Connect charger negative wire to battery ”-” negative terminal.3. Connect charger positive wire (with fuse) to battery ”+” positive terminal.4. Connect charger AC power cord to shore power outlet.BTCGR10A Charger (refer to charger manual for specific details)1. Mount charger, refer to Figure A‐1 to determine suggested location.2. Connect charger negative wire (Black) to battery ”-” negative terminal.3. Connect charger positive wire (Red) to battery”+” positive terminal.4. Connect charger AC power cord to shore power outlet.