Outdoor LP Gas Barbecue GrillModel No. GBT1401W-C Series4Assembly Instructions1 DO NOT RETURN TO PLACE OF PURCHASE.For assistance, call 1.800.762.1142 toll-free Please haveyour Owner’s Manual and model number available forreferenceNote: The model number can be found on the back or side of the grillAssembly Tips:1 Select an area where you will assemble this product Toprotect components, choose a smooth surface that’s free ofcracks or openings2 Spread out all parts3 Tighten all hardware connections by hand first Then, beforecompleting each step, go back and fully tighten all hardwareBe careful not to over-tighten That could damage surfaces orstrip threads4 For best results, complete each step in the order presentedTo complete assembly you will need:• (1) Leak Detection Solution (instructions on how to makesolution are included in “Operating Instructions” section)• (1) 14 1 oz or (1) 16 4 oz LP gas tankTypical assembly is approximately 30 minutes4 Attach Bottom Bowl Heat Shield and BurnerD x 13 Attach LegsB x 8F x 8G x 8I x 82 Attach Lid Handle, Lid Heat Shield and Brand PlateA x 2C x 2E x 2F x 2G x 2H x 2I x 2