Menu
Bachmann RPT114 Service Manual
Also see for RPT114: Owner's manual
          | |
Contents | 
1 oC O D E : 2 7 0 2 0 9Index & WarningsSoldering point.Male connector.Female connector.M/F faston connector.Test point.Supply voltage.Logic supply ground.Analog supply ground.Signal ground.Chassis ground.Flag joined with one or more flags with the same signal name inscribed.NoticeService must be carried out by qualified personnel only. Any tampering carried out by unqualified personnel during the guaranteeperiod will forfeit the right to guarantee.For a correct operation of the instrument, after having switched off, be careful to wait at least 3 seconds before switching on again.To improve the device's specifications, the schematic diagrams may be subject to change without prior notice.ATTENTIONObserve precautions when handlingelectrostatic sensitive devicesSERVICE MANUALSchematic DiagramsSchematic NotesAll components marked by this symbol have special safety characteristics, when replacing any of these components use onlymanufacturer's specified parts.The (μ) micro symbol of capacitance value is substituted by U. The (Ω) omega symbol of resistance value is substituted by E.The electrolytic capacitors are 25Vdc rated voltage unless otherwise specified. All resistors are 1/4W unless otherwise specified.All switches shown in the "OFF" position. All DC voltages measured to ground with a voltmeter 20KOhm/V.RPT114RPT114/OBACHMANNRPT114Opening InstructionsAutotest ChartBlocks DiagramPower Amplifier & Supply Board, Phones & MIDI I/O BoardKeyboard Interface Board, Contacts BoardCPU & Sound Generator BoardRPT114/O (Optical Sensor Version with)Blocks DiagramKeyboard Interface Board, Optical Contacts Board (Left Part)Optical Contacts Board (Central & Right Part)Spare Parts List56748910342 |
Related manuals for Bachmann RPT114
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved