Bacharach MONOXOR XR Quick Start Manual

Also see for MONOXOR XR: User manual

Bacharach MONOXOR XR Quick Start Manual Manual pdf 1 page image

FULL MEDIUM LOW REPLACEIMPORTANT: Perform power-up and initialization infresh air to ensure proper calibration.1. Perform a visual inspection of the analyzer, sample probeand hose assemblies. Check for signs of splits and / or cracks in the sample tubing. Assemble, clean and dry the water trap.2. Press Power Key to initiate 60-second warm-up. Address / acknowledge any faults or errors discoveredduring initialization. Ensure batteries have sufficient charge before operation.WARNING: This analyzer is not intended to be used as asafety device.WARNING: This analyzer has not been designed to beintrinsically safe for use in areas classified as hazardouslocations.CAUTION: Perform routine maintenance (replacing sensors,calibrating, etc.) as outlined in the user manual.IMPORTANT: Comply with all local and national laws, rulesand regulations associated with this equipment. Operatorsshould be aware of the regulations and standards in theirindustry / country for the operation of this analyzer.8 T-Stack Port9 USB Port10 Sample Gas Port11 Water Trap / FilterAssembly12 Standard Probe*1 IrDA Port2 Function Keys3 Navigation Keys4 Enter Key5 Run / Hold Key6 Escape Key7 Power / Backlight Key *Optional; may not be includedwith all product configurations.Combustion & EmissionsP/N: 0019-9374 | December 2019 Revision 0Quick StartGuideHigh Range CO Analyzerfor Commercial & Light Industrial Use3. Component Overview1. IntroductionThe Monoxor® XR is a portable exhaust gas analyzer designed tomeasure high CO concentrations discharged from forklifts and othercombustion engines burning propane, gasoline, diesel, LPG and CNG.Please read and strictly follow the contents of this document forinformation on the operation and maintenance of the analyzer.For more detailed product information, scan here orvisit www.mybacharach.com to access the Monoxor ®XR User Manual (P/N 0019-9376).2. Safety Instructions4. Hardware Setup3. Firmly connect sample tubing and thermocouple to theappropriate ports at the analyzer’s base.

/ 2

Related manuals for Bacharach MONOXOR XR