Baby Lock BLQ2-QGF Instructions Manual

Baby Lock BLQ2-QGF Instructions Manual Manual pdf 1 page image

800-422-2952 www.babylock.comThe 1/4” Foot with Guide is designed to help youachieve perfect 1/4” seams when piecing. Simply alignthe fabric edge next to the guide. The distance betweenthe needle and the right guide is a true 1/4”. The 1/4”Foot with a guide is also perfect for 1/4” topstitchingfrom an edge.INSTRUCTIONS:Removing the presser footRaise the presser foot (a).Attaching the presser footLower the presser foot holder (b) until the notch(c) is directly above the pin (d). Lower the presserfoot holder (b) and the presser foot (e) will engageautomatically.1/4” Foot with Guide(BLQ2-QGF)InstructionsBaby LockSewing AccessoriesLNIS-BLQ2-QGFThe Precision Dual-Feed Quilting System (PDQ) feeds the fabricfrom the top and bottom simultaneously to ensure matching of thefabric layers, used for quilting layers of fabric and batting, and whenmatching checked, striped or plaid fabrics.To Activate and Deactivate the Precision Dual-FeedQuilting System (PDQ)To activate the PDQ system, raise the presser foot. Lower the PDQmechanism slowly and swing the PDQ mechanism forward under theback of the presser foot until it is engaged and stays in the system.To deactivate the PDQ system, raise the presser foot, pull down on themechanism and swing it to the rear then raise the PDQ up.Adjustable Guide foot (BLQ2-AGF)Needs new photo can not see the guidemarks place the grey guide farther to the rightFor projects that require the utmost accuracy, such as garment sewing, topstitching orpiecing the perfect while quilt, this foot comes prepared to help. The built-in ruler withadjustable guide is perfect for keeping your measurements precise at all times.Removing the presser footRaise the presser foot (a).Attaching the presser footLower the presser foot holder (b) until the notch (c) is directly above the pin (d). Lower thepresser foot holder (b) and the presser foot (e) will engage automatically.The Precision Dual-Feed Quilting System (PDQ) feeds the fabric from the top and bosimultaneously to ensure matching of the fabric layers, used for quilting layers of faband batting, and when matching checked, striped or plaid fabrics.To Activate and Deactivate the Precision Dual-Feed Quilting System (PDQ)To activate the PDQ system, raise the presser foot. Lower the PDQ mechanism slowand swing the PDQ mechanism forward under the back of the presser foot until it isengaged and stays in the system.To deactivate the PDQ system, raise the presser foot, pull down on the mechanism aswing it to the rear then raise the PDQ up.1. Remove the all-purpose foot. Attach the Adjustable Guide foot and engage PD2. Adjust the grey guide to the desired distance. Use the red marking lines on thefoot to reference 3/8”, _”, 5/8”, _”, 7/8”, 1, 1-1/8” distances from the needle.1. Place the edge of the fabric aligned with the grey guide on the Adjustable GuiFoot.2. Lower the presser foot. Select the desired stitch. Sew at a consistent speed.The Precision Dual-Feed Quilting System (PDQ) feeds the fabric from the top and bottomsimultaneously to ensure matching of the fabric layers, used for quilting layers of fabricand batting, and when matching checked, striped or plaid fabrics.To Activate and Deactivate the Precision Dual-Feed Quilting System (PDQ)To activate the PDQ system, raise the presser foot. Lower the PDQ mechanism slowlyand swing the PDQ mechanism forward under the back of the presser foot until it isengaged and stays in the system.To deactivate the PDQ system, raise the presser foot, pull down on the mechanism andswing it to the rear then raise the PDQ up.1. Remove the all-purpose foot. Attach the Adjustable Guide foot and engage PDQ.2. Adjust the grey guide to the desired distance. Use the red marking lines on thefoot to reference 3/8”, _”, 5/8”, _”, 7/8”, 1, 1-1/8” distances from the needle.1. Place the edge of the fabric aligned with the grey guide on the Adjustable GuideFoot.2. Lower the presser foot. Select the desired stitch. Sew at a consistent speed.Adjustable Guide foot (BLQ2-AGF)Needs new photo can not see the guidemarks place the grey guide farther to the rightFor projects that require the utmost accuracy, such as garment sewing, topstitching orpiecing the perfect while quilt, this foot comes prepared to help. The built-in ruler withadjustable guide is perfect for keeping your measurements precise at all times.Removing the presser footRaise the presser foot (a).Attaching the presser footLower the presser foot holder (b) until the notch (c) is directly above the pin (d). Lower thepresser foot holder (b) and the presser foot (e) will engage automatically.

/ 2

Related manuals for Baby Lock BLQ2-QGF