Menu
BATEC HIBRID User Manual
Also see for ELECTRIC: User manual
                                                                         | |
Contents
| 
PAG 54 / 74USER MANUAL NUMBER/VERSION: MU-001/4.0 DATE OF APPLICATION: 01/09/13C/ R. Carrasco i Formiguera, 308192 Sant Quirze del Vallès [Barcelona - Spain]T +34 935442003 F +34 902876503www.batec-mobility.com info@batec-mobility.comATTENTION: Under no circumstances should you use the battery discharging port tocharge it or supply it energy in any way, whether with an enery source or a regenerativebraking system.Charging the battery:∞ The BATEC battery is charged through the XLR 3 pin port located onthe side of the battery.∞ Only charge the battery with its original BATEC MOBILITY chargerprovided to you with your BATEC.ATTENTION: Under no circumstance should you use chargers from othermanufacturers. Do not use chargers of other BATECS either, as the specifications foreach series of BATECS are different.∞ The recharging time for the BATEC MOBILITY battery is 3 hours.Both the smart charger and the smart battery management systemcut off the current when the battery is charged.∞ Charging the battery: To charge the battery the BATEC must alwaysbe switched off. You can charge the battery both with the battery inthe BATEC and outside the BATEC. Turn the lid that protects thecharging port, connect the charger to the port and to a power socketand switch on the charger. |
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved