BANTE Bante210 Instruction Manual

Contents

BANTE Bante210 Instruction Manual Manual pdf 10 page image

Bante210 Benchtop pH Meter 9Temperature CompensationIn order to get accurate measuring results, you need to enable the manual or automatic temperature compensation before measurement or calibration.AUTOMATIC TEMPERATURE COMPENSATION:Insert the connector of temperature probe into corresponding “ATC” socket, the display immediately shows “ATC” indicator. The meter is now switched toautomatic temperature compensation mode.MANUAL TEMPERATURE COMPENSATION:1. DO NOT connect the temperature probe to meter. Press oC key to enter the temperature setting mode.2. Press  or  key to set temperature value.3. Press ENTER key to confirm. Setting is completed. In the temperature setting mode, press  or  key once, the setting value will increase or decrease by 0.1. Press and hold the  or  key, thesetting value will increase or decrease by 1.MeasurepHoCATC Press MEAS key to freeze or release the measured valueATC