User ManualPage 5 of 27About the DeviceAztech WL559E is a Wall-plugged 300Mbps Wireless-N Repeater, which supportswireless 8 0 2 .1 1 b /g/n, and one 10/100 Base-T Ethernet port.RRRReeeeppppeeeeaaaatttt aaaannnnd Ed Ed Ed Exxxxtttteeeennnndddd tttthehehehe WWWWiiiiFFFFiiii NNNNeeeettttwwwworkorkorkorkWL559E supports robust 802.11n technology with up to 300Mbps data transfer rate.The extender can take an existing 802.11n wireless signal, repeat and extend it to alonger range where it is too far away for the router or access point to reach.It eliminates the cable wires while providing the same reliable network connection. Itcan repeat and extend the wireless signal from virtually any 802.11n wireless routeror access point that is launched on the market. It is backwards compatible with the802.11b/g router or access point.MMMMaaaakkkkeeee WWWWiiiired Nred Nred Nred Neeeettttwwwworkorkorkork WWWWiiiiFiFiFiFi RRRReeeeaaaaddddyyyyThe extender is equipped with 1 x 10/100M Auto MDI/MDIX LAN port that can beused to connect to an existing wired network to serve as a wireless interface. It canalso be used to configure the extender via its web-based GUI, or upgrade the firmware.MMMMIIIIMMMMOOOO TTTTeeeecccchhhhnnnnologyologyologyologyThe device is designed with MIMO technology, which successfully reduces “dead spot”,and extends network coverage within a home or in the building.Advanced SecurityWL559E features with 64/128-bit WEP encryption and WIFI Protected Access (WPA),WPA2 to ensure the network security and prevent unauthorized access to you network.PPPPororororttttaaaabbbblllleeee wwwwiiiitttthhhhoooouuuutttt tttthehehehe NNNNeeeeeeeed ofd ofd ofd of EEEExternxternxternxternaaaallll PPPPoooowwwwerererer SSSSuuuuppppppppllllyyyyThe device is easy to setup. It is portable with no need of any external power adaptor.It comes with the embedded power supply and power plug, so that users can justplug the device into a power socket.